Olio Released Model One Firmware Updates 1.1.61 & 1.1.63

olio updateOlio recently released firmware updates to help address bugs and issues in their smartwatch, the Model One.

If you recall, I recently published a review of Olio’s Model One smartwatch. Unfortunately, I declared it pretty much one of the worst train wrecks I’ve ever seen in an electronic accessory, and most certainly, the worst product I’ve looked at in 2015. My initial reaction was so poor that I recommended everyone stay away from it for now.

Recently, I’ve received noticed of not one, but two, device firmware updates for the Model One, direct from Olio. Firmware version 1.1.61 was released on 2015-12-25 and addressed a number of different issues. You can see the specifics on those, directly below. Firmware version 1.1.63 was released to resolve a firmware update issue where the watch may get stuck in “update mode, ” and not recover. In this case, as long as the device is connected to power and showing connected in Olio Assist, Olio says version 1.1.63 can be passively downloaded to the watch and the watch updated, resolving the issue. Watches successfully updated to firmware version 1.1.61 without issue would simply update to 1.1.63, and would see no additional issues or new functionality other than what came with version 1.1.61.

Thankfully, I didn’t experience this particular issue. My watch updated to versions 1.1.61 and 1.1.63 without a hitch.

Bugs and Issues Resolved:

  • Bluetooth on your watch and phone settings should no longer randomly disconnect. If it does, it should automatically reconnect.
  • Improved gesture sensitivity and optimization.
  • Added tap only setting on watch so that if gesture sensitivity doesn’t work well, you can put it on tap-only mode to save battery life.
  • Bug fixed that can cause the watch to run out of battery in less than 4 hours.
  • Automatically setting all watches to medium brightness to prevent the ALS from causing some screens to turn off. A long-term fix to use auto brightness is in development.
  • Fixed accelerometer bug that can cause the watch not to turn on via gesture. The watch will reboot when the accelerometer is in improper state.
  • Implemented synchronization protocol to ensure all Android phones display accurate time within 10 seconds. Some Android phones don’t send notifications continuously over Bluetooth, so the time update takes a while to send.
  • Fixed bug that can cause the wrong caller to be displayed on the watch during phone calls.
  • Fixed bug that causes the “updating” screen to stay on too long when updating day/night.
  • Fixed bug where “auto” mode didn’t transition properly in day/night mode.
  • Fixed bug that can cause notification actions to not work properly when notifications first came in on watch.

Based on the information above, some of the big problems that have been causing the watch to run through its full battery charge in four hours or less has been resolved. I’ll be looking at this VERY carefully, as it speaks to how the device uses Bluetooth as well as power management.

Battery life still remains the biggest issue with the Olio Model One. Even though I’ve got the latest updates on my watch, I’ve still had to have my watch sit on its charger part of the day today. (and the thing still gets bloody hot when it charges…)

Honestly, things are getting a bit better, as the update from 1.1.61 to 1.1.63 for me happened over night as planned – and was the first firmware update to happen this way. Every other update I’ve had to babysit and try to coax along. The battery life does seem a bit better, but not much.

There seems to be a long interval of time between 100% charge and 90-85% charge, and then after that, the device’s charge level drops like a rock to the mid 40%’s, where it again sits for about an hour before dropping like a rock again to the mid 20%’s. From there, it’s a gradual and steady decline to the end. I’ve also noticed that when my watch hits one of these plateaus, I can often expect it to restart on its own, out of nowhere, and when it comes back, the charge rate is much reduced (by as much as 15%).

Olio is also working on other issues, and has other updates planned. Items up for release next include, but aren’t limited to the following:

Known Issues with Pending Fixes

  • The iOS app can show disconnected when the phone setting and watch settings say connected. If this happens, turn Bluetooth off on the watch, wait five seconds, and then turn it back on. If the issue persists, kill the Olio Assist app, turn Bluetooth off on the watch, restart the phone app, and turn Bluetooth on the watch back on.
  • In “gesture off” mode, the watch will detect some wrist turns as taps. We are tuning tap detection to prevent this.
  • Despite the watch being on the charger for a long time, it might show less than 100% charged. The wireless charging firmware stops charging the watch when the battery reaches 100%, and does not restart until the battery drops below 90%. We are working on an update to the firmware that will keep the battery topped off without degrading the battery health.
  • We have identified a state that can cause the watch to charge slower than it should (>90 minutes). We are working on a fix to prevent this state from occurring.
  • It is possible that your watch will enter a state where the screen does not turn on. This is a known issue with the ALS calibration and we are working on a permanent fix. In the meantime, if you notice this issues, shine a bright light (your mobile flashlight should work) to get the screen to turn on, and set the brightness to medium.
  • When entering a new time zone, watches paired to iOS can take up to two hours to update to the new time zone. We have identified a new way to update the watch time from iOS and are working to implement that change. Temporarily, restarting Bluetooth on the watch will reset the time.

I’ll keep everyone posted on how things go with some of these updates. I still can’t recommend this smartwatch to anyone, even those that are used to beta testing and to living on the bleeding edge of technology. It’s just a bit too cold and bloody out here…

Related Posts:

Stay in touch with Soft32

Soft32.com is a software free download website that provides:

121.218 programs and games that were downloaded 237.780.356 times by 402.775 members in our Soft32.com Community!

Get the latest software updates directly to your inbox