Is Retro Good Enough? – The HTC One (M8) Dot View Case

It offers good protection, and the dot view display is cool in a retro sorta way, but…

P1060969

When I bought my iPhone 4S, I tended to carry it without a case. Most of the cases that I found, I didn’t like. The ones I liked, were too expensive, or…they wouldn’t work with an Apple branded or third party cradle. I got so fed up with it that I just decided to carry a naked device. Working with the cases that I found was just too frustrating.

That changed a little bit with my iPhone 5.  I’ve been using the same Speck case for nearly 2 years. I’m very happy with it, mostly because the back folds up and out of the way, so it works with devices and cradles that don’t work well with cases. It’s pretty cool to have a case that works – and I mean really WORKS – with your device and not against it.

When I received the HTC One M8 a few weeks ago, I was very excited to see that it came with the Dot View case.  Since it’s a loaner-review unit, the last thing I wanted to do was return it with scratches or dents in the screen or aluminum unibody. I know most reviewers understand that these things make the rounds, but you really want to take care of it. YOU don’t want to work with a beat up review unit. The next guy doesn’t want to, either.

So, the moment that after I unboxed the HTC One (M8), I put it in the Dot View Case. Here’s my feedback, specifically on the case.

1.Dot View Display Doesn’t Always Display

I find this one very frustrating. The Dot View display is supposed to display every time you close the case and then every time you double tap the front cover of the device while it’s closed over the display.  Simply  put, the HTC One (M8) review unit I have initially did this, but then stopped displaying the Dot View Display when the Dot View Case is closed on the device shortly after I started working with it on day one. Since then, the Dot View Display does appear when you double tap the closed case while it’s closed over the display, as required.

 2. Cracks and Wear

I’ve said it before. I have concerns about the hinge on the Dot View Case cracking over time with wear.  The logical way to work with this case is to flip the cover around the back of the device so that the cover stays open while you hold the device.  Over time, that’s going to create stress cracks on the spine of the case, and it’s going to weaken, rip and/ or crack. Period. This is just a matter of time.

3. Dot View Case and the Duo Camera

It’s clear to me that whomever designed the Dot View Case, never used it with the device. Part of the normal use case for the device is to take pictures with the device while it’s in the case.  This presents a couple of problems:

a.   Wrapping the Case Cover around the Device – You Can’t Take Pictures with the Case Cover open and wrapped around the back of the device. It covers the secondary lens, and the camera complains because the lenses are obstructed.  If you’re using the device with the Dot View Case and you want to take pictures, you have to open the case and let the cover flop open…which leads to our second problem.

b.   Elasticity in the Case Hinge – Leaving the case to flop open while you’re holding the device in landscape orientation, using the volume rocker as a shutter button, the Dot View Case cover wants to close shut on the device, turning off the display. This makes taking pictures with the device very frustrating.

In the end, you’re better off taking the device OUT of the case when you want to take pictures with the HTC One (M8).  Having the device in the Dot View Case while using it as a camera is very frustrating and very aggravating. While it’s very easy to take a lot of pictures with the HTC One (M8) and its rapid shutter release, the longer you work with the device as a digital camera, the more you’re going to want to have it out of the case, which completely defeats the purpose of having it in the case in the first place.

I’m not sure what the right answer is here. The case needs a couple of holes in the front at least for the camera (which would screw up the dot matrix look of the case OR require a graphic redesign of the dot view display), or you just need to make a different case choice for the HTC One entirely.

4. Use with Automotive Universal Device Cradles

This is another hot mess.   Most universal device cradles use some kind of spring tension arm to hold the device in place. Arkon makes some great universal holders. I’ve been using them for almost 10 years.

Your device needs to be in a cradle of some kind while it’s in the car. If you’re using it for navigation or for music playback, you’re going to want it secured and within reach so you can change songs, address GPS issues or answer phone calls without diverting your attention from the road.

The problem is that the case is flexible and there’s a great deal of elasticity in the plastic/ rubber hinge. You have to fold it around the back of the device so you can see the device while it’s in the case and in a universal cradle.  Side gripping cradles want to grab the case cover and fold it in half long ways/ portrait style. When this happens, I feel like the case cover is going to crack. Top gripping cradles want to grab the case and fold it in half short ways/ landscape style. When this happens, I feel like the plastic/ rubber hinge is going to rip AND the case cover is going to crack.

Again, this is another instance where you’d think that taking the device out of the case would be best, but at that point. However, that brings me to my final point regarding the Dot View Case.

5. Practicality Over Time – Don’t Bother

The Dot View Case is a book style case that rests its novelty in a dot matrix styled, retro display created by the holes in the cover.  When using this case with the HTC One (M8), I found I wanted the device in some sort of a protective case nearly all the time. It’s a mobile device, and I use mine most when I am in fact…mobile.

However, I found myself wanting to plug and chug the device in and out of the case more often than not when taking pictures and when putting it in a universal device cradle in the car.  The case doesn’t work well in these use cases.

I have an hour drive to work every day. That’s 2 hours in the car. Add normal picture taking/ selfies posing and other use to this, and I think you’ll find as I did.  The Dot View Case is a flop.

The problem is the case design, not the case type – a book style case. In contrast, book cases for the Samsung Galaxy S4 or S5 works and works well because of the huge window cut in them to display the date and time when they are closed. When you fold them back, the opening in the case cover doesn’t obstruct the camera lens or LCD flash, allowing for unobstructed camera use.  The case hinge also doesn’t have the elasticity that the Dot View Case’s plastic/ rubber hinge and doesn’t want to swing closed all the time. I believe it’s also made of leather or other material and will probably weather the stress a bit better.

In the end, while I truly believe you need a case for any and all mobile devices and smartphones, the HTC One (M8) Dot View Case, unfortunately isn’t very practical; and that really bothers me.  I like the retro styled, dot matrix display and the fact that the device can detect a double tap to activate the display THROUGH the case, but in working with it over the past few weeks, I am too afraid of ripping, cracking or breaking it while using it for it to be of any real, long term use to me or any other user of the HTC One (M8).

What do you think?  Is the Dot View Case’s cool factor enough to excuse its many foibles? With its Gorilla Glass front and aluminum shell, is a case REALLY necessary?  Am I being too critical of the design and of book style cases in general?  Why don’t you give me your thoughts in the comments section below and let me know what you think?

 

Related Posts:

Stay in touch with Soft32

Soft32.com is a software free download website that provides:

121.218 programs and games that were downloaded 237.780.356 times by 402.775 members in our Soft32.com Community!

Get the latest software updates directly to your inbox